Ramor® 550

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

General Product Description

The ballistic protection steel with extra-high hardness.

Ramor® 550 is a ballistic protection steel of extra-high hardness, available in thicknesses of 3.0 ‑ 15.0 mm (0.118‑0.591″) and hardnesses of 540‑600 HBW.

Ramor® 550 is available as cut-to-length sheet in thicknesses of 3.0 ‑ 6.0 mm (0.118‑0.236″) and as plate in thicknesses of 6.0 ‑ 15.0 mm (0.236‑0.591″). Delivered in quenched condition, Ramor® 550 is not intended for further heat treatment.

Mechanical Properties

Hide/Show specific columns Edit
Select columns to display
  • Hardness
    (HBW)
Thickness
(mmin)
Hardness
(HBW)
Ramor® 550 3.0 - 15.00.118 - 0.590 540 - 600
Compare parameters

Select one parameter to compare

Comparison

    Mechanical Testing

    Brinell hardness test according to EN ISO 6506-1 on each heat treatment individual/coil.

    Hardness is measured on a milled surface 0.3-2 mm below plate surface.

    Chemical Composition (ladle analysis)

    Hide/Show specific columns Edit
    Select columns to display
    • C
      (max %)
    • Si
      (max %)
    • Mn
      (max %)
    • P
      (max %)
    • S
      (max %)
    • Cr
      (max %)
    • Ni
      (max %)
    • Mo
      (max %)
    • B
      (max %)
    C
    (max %)
    Si
    (max %)
    Mn
    (max %)
    P
    (max %)
    S
    (max %)
    Cr
    (max %)
    Ni
    (max %)
    Mo
    (max %)
    B
    (max %)
    0.36 0.70 1.5 0.015 0.010 1.50 2.50 0.80 0.005
    Compare parameters

    Select one parameter to compare

    Comparison

      The steel is grain refined. Phosphorous and sulphur are not intentionally alloying elements.

      Tolerances

      More details are given on www.ssab.com.

      Thickness

      Hide/Show specific columns Edit
      Select columns to display
      • Product Type
      • Thickness
        (mmin)
      • Tolerance
        (mmin)
      Product Type Thickness
      (mmin)
      Tolerance
      (mmin)
      Sheet 3.00 - 4.000.118 - 0.157 - 0.0 / + 0.36- 0.0 / + 0.0142
      Sheet 4.01 - 5.000.158 - 0.197 - 0.0 / + 0.40- 0.0 / + 0.0157
      Sheet 5.01 - 6.000.197 - 0.236 - 0.0 / + 0.42- 0.0 / + 0.0165
      Plate 6.0 - 7.90.236 - 0.311 - 0.0 / + 0.8- 0.0 / + 0.0315
      Plate 8.0 - 15.00.315 - 0.590 - 0.0 / + 1.0- 0.0 / + 0.0394
      Compare parameters

      Select one parameter to compare

      Comparison

        Length and Width

        Sheets are delivered with mill edges cut as standard.

        • Tolerances conform to EN 10 051 or to SSAB´s standard after agreement.

        Plate delivered according to SSAB’s dimension program.

        • Tolerances conform to EN 10 029 or to SSAB’s standard after agreement.
        • Dimensional tolerances for plate with mill edge according to special agreement. 

        Shape

        Tolerances according to EN 10029 for plate and according to EN 10051 for sheet.

        Flatness

        Tolerances according to SSAB’s flatness tolerances which are more restrictive than EN 10 029 Class N (steel type L) and EN 10 051.

        Hide/Show specific columns Edit
        Select columns to display
        • Product Type
        • 1000 ruler
          (mmin)
        Product Type 1000 ruler
        (mmin)
        Sheet 60.236
        Plate 60.236
        Compare parameters

        Select one parameter to compare

        Comparison

          Product Type
          Sheet
          1000 ruler
          (mmin)
          60.236
          Product Type
          Plate
          1000 ruler
          (mmin)
          60.236

          Surface Properties

          According to EN 10163-2 Class B, Subclass 3.

          Delivery Conditions

          Ramor is delivered in quenched condition.