Ramor® 600

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

On this page

General Product Description

The ballistic protection steel with extra-high hardness

Ramor® 600 is a ballistic protection steel of extra-high hardness, nominal 600 HBW, available in thicknesses of 3.0 ‑6.0 mm (0.118‑0.236″).

Ramor® 600 is available as cut-to-length sheet in thicknesses of 3.0 ‑ 6.0 mm (0.118‑0.236″). Delivered in quenched condition, Ramor® 600 is not intended for further heat treatment.

Mechanical Properties

Hide/Show specific columns Edit
Select columns to display
    Thickness
    (mmin)
    Hardness
    (HBW)
    Ramor® 600 3.0 - 6.00.118 - 0.236 570 - 640
    Compare parameters

    Select one parameter to compare

    Comparison

      Mechanical Testing

      Brinell hardness test according to EN ISO 6506-1 on each heat treatment individual/coil.

      Hardness is measured on a milled surface 0.3-2 mm below plate surface.

      Chemical Composition (ladle analysis)

      Hide/Show specific columns Edit
      Select columns to display
        C
        (max %)
        Si
        (max %)
        Mn
        (max %)
        P
        (max %)
        S
        (max %)
        Cr
        (max %)
        Ni
        (max %)
        Mo
        (max %)
        B
        (max %)
        0.40 0.70 1.5 0.015 0.010 1.50 2.50 0.80 0.005
        Compare parameters

        Select one parameter to compare

        Comparison

          The steel is grain refined. Phosphorous and sulphur are not intentionally alloying elements.

          Tolerances

          More details are given on www.ssab.com.

          Thickness

          Hide/Show specific columns Edit
          Select columns to display
            Product Type Thickness
            (mmin)
            Tolerance
            (mmin)
            Sheet 3.00 - 4.000.118 - 0.157 - 0.0 / + 0.36- 0.0 / + 0.0142
            Sheet 4.01 - 5.000.158 - 0.197 - 0.0 / + 0.40- 0.0 / + 0.0157
            Sheet 5.01 - 6.000.198 - 0.236 - 0.0 / + 0.42- 0.0 / + 0.0165
            Compare parameters

            Select one parameter to compare

            Comparison

              Length and Width

              Sheets are delivered with mill edges cut as standard.

              • Tolerances conform to EN 10 051 or to SSAB´s standard after agreement.

              Shape

              Tolerances according to EN 10051.

              Flatness

              Tolerances according to SSAB’s flatness tolerances which are more restrictive than EN 10051.

              Hide/Show specific columns Edit
              Select columns to display
                Product Type 1000 ruler
                (mmin)
                Sheet 60.236
                Compare parameters

                Select one parameter to compare

                Comparison

                  Product Type
                  Sheet
                  1000 ruler
                  (mmin)
                  60.236

                  Surface Properties

                  According to EN 10163-2 Class B, Subclass 3.

                  Delivery Conditions

                  Ramor is delivered in quenched condition.