Product & services Brands & products Strenx Product offer and datasheets Strenx 100-110 Strenx 110 XF
Strenx performance steel
/ ... / Strenx 100-110 / Strenx 110 XF
Home
Product & services
Brands & products
Strenx
Product offer and datasheets
Strenx 100-110
Strenx 110 XF
Current page
Strenx performance steel

Strenx® 110 XF

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

Please visit SSAB’s privacy statement for more information on how we process personal data

Strenx® 110 XF high-strength structural steel

Strenx® 110 XF is a cold forming high-strength structural steel. It is a thermomechanically rolled product with a minimum yield strength of 110 ksi. It is suitable for a wide range of structural applications, including equipment and components in the transport, lifting and agriculture industry. Strenx® 110 XF meets the requirements of EN 10149-2 S700MC, ASTM A1011 grade 100 and ASTM A1018 grade 100 and can be supplied according to all of these standards' specifications on request. Strenx® 110 XF is available in thicknesses of 0.079 - 0.393 inches, and in widths up to 63 inches as coil, slit coil and cut to length sheets in lengths up to 630 inches.

Get technical advice
Show specs in Metric Imperial

Dimension Range

Strenx® 110 XF is available in thicknesses of 2.0 - 10.0 mm, and in widths up to 1600 mm as coil, slit coil and cut to length sheets in lengths up to 16000 mm.

Mechanical Properties

Hide/Show specific columns Edit
Select columns to display
  • Thickness
    (mmin)
  • Yield strength ReH 1)
    (min MPaksi)
  • Tensile strength Rm
    (min MPaksi)
  • Elongation A50
    (min %)
Thickness
(mmin)		 Yield strength ReH 1)
(min MPaksi)		 Tensile strength Rm
(min MPaksi)		 Elongation A50
(min %)
2.00 - 10.000.079 - 0.393 760110 813118 12
Compare parameters

Select one parameter to compare

Comparison

    The mechanical properties are tested in the transverse direction.

    Testing can also be performed in the longitudinal direction, according to requirements in EN 10149-2 S700MC and ASTM A1011 grade 100 on request.

    1) If ReH is not applicable then Rp0.2 is used.

    Impact Properties

    Hide/Show specific columns Edit
    Select columns to display
    • Product
    • Min. impact energy for longitudinal testing,
      Charpy V 10x10 mm test specimen
    Product Min. impact energy for longitudinal testing,
    Charpy V 10x10 mm test specimen
    Strenx® 110 XF 27 J / -40 °C20 ft-lbs / -40 °F
    Compare parameters

    Select one parameter to compare

    Comparison

      Product
      Strenx® 110 XF
      Min. impact energy for longitudinal testing,
      Charpy V 10x10 mm test specimen
      27 J / -40 °C20 ft-lbs / -40 °F

      Impact testing according to EN ISO 148-1 is performed on thicknesses ≥ 6 mm. The specified minimum value corresponds to a full-size specimen.

      Bending Properties

      Hide/Show specific columns Edit
      Select columns to display
      • Bending
      • t < 3.00 mm
      • 3.00 ≤ t ≤ 6.00 mm
      • t > 6.00 mm
      Bending t < 3.00 mm 3.00 ≤ t ≤ 6.00 mm t > 6.00 mm
      Min. inner bending radius for a 90° bend 0.8 xt 1.2 xt 1.6 xt
      Compare parameters

      Select one parameter to compare

      Comparison

        Valid in both the longitudinal and transverse direction.

        Chemical Composition (ladle analysis)

        Hide/Show specific columns Edit
        Select columns to display
        • C
          (max %)
        • Si
          (max %)
        • Mn
          (max %)
        • P
          (max %)
        • S
          (max %)
        • Al
          (min %)
        • Nb
          (max %)
        • V
          (max %)
        • Ti
          (max %)
        C
        (max %)        		 Si
        (max %)        		 Mn
        (max %)        		 P
        (max %)        		 S
        (max %)        		 Al
        (min %)        		 Nb
        (max %)        		 V
        (max %)        		 Ti
        (max %)
        0.12 0.03 2.10 0.020 0.010 0.015 0.09 1) 0.20 1) 0.15 1)
        Compare parameters

        Select one parameter to compare

        Comparison

          Strenx® 110 XF is available with different levels of Si: from max 0.03%, up to max 0.28%. Max Si 0.03% is the standard version that is suitable for hot dip galvanizing with thin Zinc layers, and for products that will not be galvanized. If the material is to be hot-dip galvanized and a thicker Zinc layer is requested, this must be specified at the time of order.

          1) Sum of Nb, V and Ti = max 0.22%.

          Tolerances

          More details are given in SSAB’s brochure Strenx® Guarantees.

          Thickness

          Tolerances according to Strenx® Thickness Guarantees.

          Strenx® Guarantees offer considerably narrower thickness tolerances compared to EN 10051. 

          Length and Width

          Width and length tolerances according to SSAB standard.

          The SSAB standard offer narrower width and length tolerances compared to EN 10051.

          Length tolerances only apply for cut to length sheets.

          Shape

          Tolerances according to EN 10051.

          Narrower tolerances according to the SSAB standard are available on request 

          Flatness

          Tolerances according to Strenx® Flatness Guarantees Class A.

          Strenx® Flatness Guarantees offer narrower tolerances compared to EN 10051.

          Flatness guarantees only apply for cut to length sheets. 

          Surface Properties

          According to EN 10163-2 Class A, Subclass 3.

          Delivery Conditions

          Thermomechanically Rolled. Strenx® 110 XF is available in as rolled or pickled surface condition with mill or cut edge.

          Fabrication and Other Recommendations

          Welding, bending and machining

          Strenx® 110 XF has good welding, cold forming and cutting performance. Strenx® 110 XF is a cold forming steel not suited for heat treatments at temperatures above 1080°F (580°C) since the material then may lose its guaranteed properties.

          For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.

          Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the product.